TW-9 "Coverall" Towel Dispenser and Waste Receptacle Combination   Specifications: Unit fabricated of type 18-8 304 stainless steel with exposed surfaces #4 satin finished. One piece seamless door construction, Extra Heavy 18 gauge (1.2mm) with 5/8" (16mm) return for rigidity. Door is mounted to cabinet with continuous stainless steel piano hinge and fitted with two tumbler locks. Self-closing push door mounted on continuous stainless steel piano hinge and lettered "Push." Plastic inner container, capacity 5-1/2 gallons. All welded construction. Capacity: 600 C-fold or 800 multi-fold or 1100 single-fold towels Overall Dimensions: 14" (356mm)W x 58-1/8" (1400mm)H x 6" (152mm)D Wall Opening: 11-1/2" (392mm)W x 53-5/8" (1362mm)H x 5-3/4" (146mm)min. depth Mounting Height: 72" (1828mm) to top of unit, 62" (1575mm) for handicapped Options available: TW-2F     Same as TW-2 but with 2" (51mm) skirt for semi-recessing TW-2FS   Same as TW-2 but with 6" (152mm) skirt for surface mounting TW-2-4    Same as TW-2 but for 4" (102mm) walls, fully recessed, with no push door. Will not dispense single-fold towels, 4-1/2 gallon waste capacity. TW-9       Similar to TW-2 but requires wall opening of 11-1/2" (392mm)W x 53-5/8" 1362mm)H x 5-3/4" (146mm)min. depth TW-9F     Same as TW-9 but with 2" (51mm) skirt for semi-recessing TW-9FS   Same as TW-9 but with 6"(152mm) skirt for surface mounting TW-9-4    Same as TW-9 but for 4" (102mm) walls, fully recessed, with no push door. TW-9 "Coverall" Towel Dispenser and Waste Receptacle Combination Data Sheet See the GAMCO Home page for PDF "How To" information. NOTE: See catalog for similar products and technical information.